When a cleaner can't clock in, the whole day gets harder. Statuses go stale, timesheets get messy, and you end up chasing texts. Most of the time, it comes down to one of two settings: your arrival window or location-based clock-in. This article walks through both, plus what to send our support team if neither one is the cause.
1. Check the Arrival Window
Your arrival window controls how early a cleaner can clock in to a job. This is the most common reason a cleaner gets blocked.
Where to find it
Go to Settings.
Select Scheduling and Clocking In and press Edit.
Scroll down to the Clock In, Clock Out section.
Find the Arrival Window setting, which has a Before and After value.
What the arrival window does
The arrival window does three things:
Tells your client when to expect you. A 9:00 AM job with a 15-minute window means the client expects your team between 8:45 and 9:15.
Sets the earliest clock-in time. Cleaners can clock in as early as the "Before" value allows — and no earlier.
Controls running-late alerts. Allison won't flag a cleaner as running late until the "After" window has passed.
Example
A job is scheduled for 9:00 AM with a 30-minute "Before" window. Because you've told the client your team may arrive as early as 8:30, that's the earliest your cleaner can clock in.
Clocking in at 8:29 — blocked
Clocking in at 8:29 and 30 seconds — still blocked
Clocking in at 8:30 — works
The most common scenario: the last job finished early
We see this one a lot. A cleaner wraps up their morning job early and heads to a 2:00 PM job. They try to clock in at 1:00 and can't — because 1:00 is outside the arrival window.
The fix: edit the job and move the estimated start time up to when the cleaner actually arrived. Once the job's start time is updated, they'll be able to clock in.
A note on wide arrival windows
You can set the window to 30 minutes, 45 minutes, or even two hours. Every business runs differently, and that's fine.
That said, a very wide window gives your clients a vague idea of when you'll show up. If your schedule shifts during the day, we recommend editing the job's start time instead of widening the window. Your clients get a more accurate arrival estimate, and your cleaners can still clock in when they get there.
For more on this setting, see How to Set Your Arrival Window.
2. Check Location-Based Clock-In
In the same Clock In, Clock Out section, you'll find Require cleaners to be on site to clock in. When this is on, Allison uses the cleaner's GPS to confirm they're at the property before letting them clock in.
Location permission is controlled by the cleaner's phone
When a cleaner first uses Allison, their phone asks for permission to share their location. If they tap Don't Allow, Allison can't see where they are — and they won't be able to clock in while this setting is on.
This is a device setting, not an Allison setting. The cleaner will need to turn location access back on for Allison in their phone's settings.
Weak GPS signal
Even with permission turned on, a weak GPS signal can stop Allison from verifying a cleaner's location. This is common in rural areas or properties with poor cell service.
That's what the Allow clock in anyways option is for. When it's on, a cleaner can still clock in if Allison can't verify their location.
his is a good setting to turn on if your team works in areas with spotty service. If you notice a pattern of cleaners clocking in when they weren't actually at the property, you can address that with them directly.
For more help with location issues, see Troubleshooting Location Issues for Clocking In.
Need Them Clocked In Right Now?
You can always clock a cleaner in yourself. Open the job from any place the job is shown (Today Screen, Upcoming Screen, Calendar, etc.), click the dropdown next to the cleaner's name, and choose Clock in at job start or Clock in at a specific time.
Full steps are in Manually Clocking In, Marking Complete & Editing Timesheets.
Still Stuck? Here's What to Send Support
If the arrival window and location settings aren't the issue, we're happy to dig in. But "my cleaner can't clock in" doesn't give us enough to go on. Before you reach out, ask your cleaner for:
Any error message they saw — a screenshot is best
What happened — did the button not respond, did the app freeze, did something look wrong?
Their device — for example, iPhone 15 or Samsung Galaxy S23
Their operating system and version — usually found under Settings → General → Software (or About Phone on Android)
The job they were trying to clock in to, and the time they tried
With that information, we can usually find the problem quickly.
Questions? Reach out to us at [email protected].

